View RP30-2425SE_1115720.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Features

2:1 Wide Input Voltage Range 30 Watts Output Power 1.6kVDC Isolation Fixed Operating Frequency Six-Sided Continuous Shield International Safety Standard Approvals UL 1950 Component Recognized Standard 50.8 x40.6x10.2mm Package Efficiency to 90%
POWERLINE
DC/DC-Converter
RP30S_DE Series
30 Watt Single & Dual Output
Selection Guide 12V, 24V and 48V Input Types
Part Number Input Range VDC 9-18 9-18 9-18 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 36-75 36-75 36-75 9-18 9-18 18-36 18-36 36-75 36-75 Output Voltage VDC 1.5 1.8 2.5 3.3 5 12 15 1.5 1.8 2.5 3.3 5 12 15 1.5 1.8 2.5 3.3 5 12 15 12 15 12 15 12 15 Output Current mA 6000 6000 6000 6000 6000 2500 2000 6000 6000 6000 6000 6000 2500 2000 6000 6000 6000 6000 6000 2500 2000 1250 1000 1250 1000 1250 1000 Input (4) Current mA 1014 1169 1582 2037 3012 2976 2976 493 580 780 1010 1490 1470 1470 244 290 390 500 740 730 730 3012 3012 1488 1488 744 744 Efficiency(5) % 78 81 83 85 87 88 88 80 82 84 86 88 89 89 81 83 85 87 89 90 90 87 87 88 88 88 88 Capacitive(6) Load max. F 85800 65000 33000 19500 10200 3240 1100 85800 65000 33000 19500 10200 3300 1100 85800 65000 33000 19500 10200 3300 1100 1020 675 1020 675 1020 675
RP30-121.5SE RP30-121.8SE RP30-122.5SE RP30-123.3SE RP30-1205SE RP30-1212SE RP30-1215SE RP30-241.5SE RP30-241.8SE RP30-242.5SE RP30-243.3SE RP30-2405SE RP30-2412SE RP30-2415SE RP30-481.5SE RP30-481.8SE RP30-482.5SE RP30-483.3SE RP30-4805SE RP30-4812SE RP30-4815SE RP30-1212DE RP30-1215DE RP30-2412DE RP30-2415DE RP30-4812DE RP30-4815DE
Description
The E-Series of DC/DC Converters are fully certified to EN 60950: 2000. This makes them ideal for all Telecom and safety applications where approved isolation is required. They also meet UL 1950 and CSA 950 standards. 240 April-2005 www.recom-international.com
POWERLINE
DC/DC-Converter
RP30-S_DE Series
RP30-4805SEW With Heat Sink
125 100
Derating-Graph (Ambient Temperature)
RP30-4805SE
125 100 75 Output Power (%) 50 25 0 -40 -25 -10 0 50 60 70 80 90 100 62C
Output Power (%)
Natural Convection
75 50 25
Natural Convection
0 -40 -25 -10 0
50 60 70
Ambient Temperature Range (C)
Ambient Temperature Range (C)
80 90 100 71C
Derating graphes are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical customer service at info@recom-development.at
Typical Characteristics
RP30-4805SE
Efficiency VS Input Voltage 93 92 91 90 89 88 87 86 85 84 83 82 92 90 89 88 87 86 85 84 80 78 76 74
RP30-4805SE
Efficiency VS Output Load
Efficiency (%)
Efficiency (%)
36
40
45
50
55
60
65
70
75
1
2
3
4
5
6
Intput Voltage (V)
Output Load (A)
Specifications (typical at nominal input and 25C unless otherwise noted)
Input Voltage Range 12V nominal input 24V nominal input 48V nominal input 12V input DC-DC ON DC-DC OFF 24V input DC-DC ON DC-DC OFF 48V input DC-DC ON DC-DC OFF 9-18VDC 18-36VDC 36-75VDC 9VDC 8VDC 17.8VDC 16VDC 36VDC 33VDC L-C Type (Complies with ETS300 132 part 4.4) 12V Input 24V Input 48V Input 5V/ms max 36VDC 50VDC 100VDC 30mAp-p DC-DC ON DC-DC OFF Nominal input 25ms typ. Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA continued on next page www.recom-international.com April-2005 241
Under Voltage Lockout
Input Filter (see note 1) Input Voltage Variation dv/dt Input Surge Voltage (100 ms max.)
Input Reflected Ripple (nominal Vin and full load) Start Up Time (nominal Vin and constant resistor load) Remote ON/OFF (see note 7) Remote OFF input current
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25C unless otherwise noted)
Output Power Output Voltage Accuracy (full Load and nominal Vin) Voltage Adjustability Minimum Load Line Regulation (LL-HL at full load) Load Regulation (25% to 100% FL) Cross Regulation (Note 9) Ripple and Noise (20MHz bandwith) (Measured with a 1004pF/50V MLCC) Temperature Coefficient Transient Response (25% load step change) Over Voltage Protection Zener diode clamp (only single) 1.5, 1.8, 2.5, 3.3V 5V 12V 15V Single & Dual Single Dual Single Dual
RP30-S_DE Series
30W max. 1% 10% 0% 0.2% 0.5% 0.5% 1% 5% 50mVp-p 75mVp-p 100mVp-p 0.02%/C, max. 300S 3.9V 6.2V 15V 18V 150% typ Hiccup, automatic recovery see Selection Guide" table 1.600VDC min. 109 min. 1000pF max. 300kHz typ. UL 1950, EN60950 -40C to +85C(with derating) +100C -55C to +105C Natural convection Natural convection with Heat Sink 115C typ. 10C/Watt 8.24C/Watt MIL-STD-810D 10-55Hz, 2G, 30 Min. along X, Y and Z 5% to 95% RH Nickel-Coated copper Non-conductive black plastic Epoxy (UL94-V0) EN55022 EN55022 EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 Class A Class A Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 Perf. Criteria 2 continued on next page
Single 1.5, 1.8, 2.5, 3.3, 5V Single 12, 15V Dual 5, 12, 15V
Over Load Protection (% of full load at nominal Vin) Short Circuit Protection Efficiency Isolation Voltage Isolation Resistance Isolation Capacitance Operating Frequency Approved to Safety Standards Operating Temperature Range Maximum Case Temperature Storage Temperature Range Over Temperature Protection Thermal Impedance Thermal Shock Vibration Relative Humidity Case Material Base Material Potting Material Conducted Emissions Radiated Emissions ESD Radiated Immunity Fast Transient Surge Conducted Immunity
242
April-2005
www.recom-international.com
POWERLINE
DC/DC-Converter
Specifications (typical at nominal input and 25C unless otherwise noted)
Weight Dimensions MTBF (see note 2)
RP30-S_DE Series
48g 50.8 x 40.6 x 10.2mm 1.535 x 106 Hours
Notes :
1. An external filter capacitor is required for normal operation. The capacitor should be capable of handing 1A ripple current for 48V/24V models. RECOM suggest: Nippon chemi-con KMF series, 220F/100V, ESR 90m . 2. BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). 3. Simulated source impedance of 12uH. 12uH inductor in series with +Vin. 4. Maximum value at nominal input voltage and full load of standard type. 5. Typical value at nominal input voltage and full load. 6. Test by minimum Vin and constant resistor load. 7. The ON/OFF control pin voltage is referenced to negative input 8. Heat sink is optional and P/N: 7G-0011A. 9. See application notes for EMI-filtering.
Package Style and Pinning (mm)
3rd angle projection
50.80 10.20 dia. 1.0 5.6
40.60
Pin Connections Pin # 1 2 4 5 6 7 8 Single +Vin -Vin CTRL No Pin +Vout -Vout Trim Dual +Vin -Vin CTRL +Vout Com -Vout Trim
45.70
5
17.80
Pin Pitch Tolerance 0.35 mm
Bottom View
5.10 15.20
1 2
10.20
6
12.70
External Output Trimming
10.20 17.80
7 4
Output can be externally trimmed by using the method shown below. ( ) for dual output trim
8
7(7)
Trim Up RU
8(8)
Trim Down RD
8(8)
6(5)
www.recom-international.com
April-2005
243

▲Up To Search▲

Price & Availability of RP30-2425SE

	To Download RP30-2425SE Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .